Industrial endoscope manufacturers are currently playing an increasingly important role in the development of industrial enterprises. Any precision device requires us to do regular inspections to avoid affecting people’s daily life and production; however, when using an endoscope, various faults are inevitable due to improper operation methods. If the detection effect does not deviate due to improper operation, it will be greater than the gain. The endoscope can be divided into three parts: the host, the catheter, and the probe. In addition to controlling the host buttons and screen, the front-end probe can also be regarded as a very important core component, which can determine the quality of the image and the illumination of the optical fiber. It directly determines the success or failure of the inspection quality. Usually at the top of the camera, the interior is wrapped with an illumination fiber bundle, and the guide tungsten filament determines the transmission signal of the video information. If non-standard enterprises can operate or develop, the probe of our country’s electronic endoscope will be damaged to a certain extent. So, what problems generally occur when the probe of an industrial endoscope is used? What should be paid attention to when using it? The following is from Microvision Optoelectronics. 1. If the probe is pressed or deformed, the image information collected by the probe cannot be converted normally, and the image on the display screen will be abnormal: flower screen or color distortion, etc.; 2. If the internal lighting fiber of the probe is seriously damaged, it will affect the transmission of the optical fiber network, causing the brightness to be too bright or the brightness to be reduced, affecting the clarity of the entire picture; 3. If the video signal in the probe is damaged, the video signal cannot be transmitted normally, the county grain area cannot receive the image processing signal, or a black screen will appear; 4. If the front lens of the probe is not seriously damaged, the light tube will crack, the language output light of the lens will diverge, and the measured object cannot capture the picture in time when shooting, and the operation cannot be realized; The industrial endoscope probe will encounter various injuries during frequent operation. These problems will definitely affect the use of the machine. What should I pay attention to in daily use? 1. Before using the lens barrel for endoscopic surgery, make sure that one lens is in a straight line. When the cannula is curled, the enterprise is prohibited from rotating. 2. During daily placement, the probe must not be squeezed, bent or dropped to avoid system failure. 3. The probe should not be soaked in water for a long time. After use, be sure to wipe it quickly before placing it again; 4. When the camera probe is bent again, it must not be taken out directly from the pipe. It should be controlled by the joystick before taking it out, and it must not be pulled by hand; 5. After using in harsh social environments, be sure to pay attention to the development and cleaning of the lens language. It can be wiped clean with a dust-free cloth to avoid affecting the next use; Industrial endoscope probes will inevitably cause various damages during use. Whether it is a problem with guidance, lighting or display, you must contact the manufacturer as soon as possible;